Mifereji ya Hexagonal最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Vifaa vya kuchimba vya hexagonal vinatengenezwa kwa usahihi wa CNC na matibabu ya joto ya hali ya juu kwa msingi wa chuma kama Sandvik.
Parameta
• Ukubwa wa nyuzi: R22, R25, R28, SSR28, R32, SSR32, R35, SSR35, R38, T38, mengine.
• Kipimo cha bar: Hex.22, Hex.25, Hex.28, Hex.32, Hex.35.
• Urefu: 2100mm hadi 6095mm.
Vipengele
• Mchakato wa kaboni unatumika kuongeza ugumu wa uso, hivyo kutoa ubora mzuri wa kuvaa na muda wa maisha wa rangi za kuchimba;
• 23CrNi3Mo, ambayo iko katika ligi moja na Sandvik Sandbar 64, inatumika kama nyenzo ya varugu vya kuchimba.
• Gharama nafuu, utendaji mzuri kwa bei inayofaa.
• Aina kamili za mjeledi ya kuchimba kwa hali mbalimbali za kuchimba.
Maombi
Majukumu ya kuchimba katika ujenzi wa barabara, ujenzi, uchimbaji madini, uchimbaji mawe, n.k.
Mfafanuzi
Mstaari wa Kutandika na Kufanya Tunnel / Mstaari wa MF (Speed)  |
| Maelezo | Muda | Pembejeo | Uzito | ||
| mm | mguu | mm | inchi | kg | |
| Drifter RodR32 – Hex.25 – R25 | 2100 | 6′ 10 5/8” | 25 | 1” | 8.60 |
| 2200 | 7′ 2 5/8” | 25 | 1” | 9.00 | |
| 2400 | 7′ 10 1/2” | 25 | 1” | 9.30 | |
| 2600 | 8′ 6 3/8” | 25 | 1” | 10.0 | |
| 2800 | 9′ 2 1/4” | 25 | 1” | 10.8 | |
| 3090 | 10′ 1 5/8” | 25 | 1” | 12.0 | |
| Rod ya DrifterR32 – Hex.28 – R28 | 2400 | 7′ 10 1/2” | 28 | 1 1/8” | 11.9 |
| 2600 | 8′ 6 3/8” | 28 | 1 1/8” | 13.6 | |
| 3050 | 10′ | 28 | 1 1/8” | 17.0 | |
| 3700 | 12′ | 28 | 1 1/8” | 18.5 | |
| 4000 | 13′ 1/2” | 28 | 1 1/8” | 21.0 | |
| 4305 | 14′ | 28 | 1 1/8” | 23.5 | |
| Rod ya DrifterR38 – Hex.32 – R32 | 3050 | 10′ | 32 | 1 1/4” | 19.5 |
| 3700 | 12′ | 32 | 1 1/4” | 24.0 | |
| 4305 | 14′ | 32 | 1 1/4” | 27.9 | |
| 4915 | 16′ | 32 | 1 1/4” | 31.8 | |
| Rod ya DrifterR38 – Hex.35 – R32 | 3050 | 10′ | 35 | 1 3/8” | 21.4 |
| 3700 | 12′ | 35 | 1 3/8” | 29.0 | |
| 4305 | 14′ | 35 | 1 3/8” | 33.8 | |
| 4915 | 16′ | 35 | 1 3/8” | 38.6 | |
| 5525 | 18′ | 35′ | 1 3/8′ | 43.4 | |
| Rod ya DrifterT38 – Hex.35 – R32 | 3700 | 12′ | 35 | 1 3/8” | 29.0 |
| 4305 | 14′ | 35 | 1 3/8” | 33.8 | |
| 4915 | 16′ | 35 | 1 3/8” | 38.6 | |
| 5525 | 18′ | 35 | 1 3/8” | 43.4 | |
| MF(Mspeed) Kiharusi cha DrifterT38 – Hex.35 – R32 | 3700 | 12′ | 35 | 1 3/8” | 29.2 |
| 4305 | 14′ | 35 | 1 3/8” | 34.0 | |
| 4915 | 16′ | 35 | 1 3/8” | 38.8 | |
| 5525 | 18′ | 35 | 1 3/8” | 43.6 | |
Mifereji ya Hexagonal最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Mifupa ya Kupanua Mduara最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Imetengenezwa kutokana na chuma sawa na Sandvik, kinachozalishwa kupitia usindikaji wa CNC na matibabu ya joto ya kisasa.
Mifupa ya kuchimba yenye nyuzi, inayofanya kazi na mashine za kuchimba za hidroliki na jumbo za hidroliki, ina nyuzi kuu za R22, R25, R28, R32, TR35, T38, T45, T51, ST58, ST68 na T60.
Vipengele
• Mchakato wa kaboni unatumika kuongeza ugumu wa uso, hivyo kutoa ubora mzuri wa kuvaa na muda wa maisha wa rangi za kuchimba;
• 23CrNi3Mo, ambayo iko katika ligi moja na Sandvik Sandbar 64, inatumika kama nyenzo ya varugu vya kuchimba.
• Gharama nafuu, utendaji mzuri kwa bei inayofaa.
• Aina kamili za mjeledi ya kuchimba kwa hali mbalimbali za kuchimba.
Maombi
Mifumo ya kuchimba yenye nyuzi imegawanywa katika mrefu wa MF na mrefu wa upanuzi, ambayo inatumika sana katika uchimbaji wa madini wa wazi, uchimbaji wa madini wa chini ya ardhi, ujenzi wa tunnel, kutia nanga, kuchukua mfuniko wa tanuru, ujenzi wa tunnel, uhandisi wa nguvu za maji, uchimbaji wa mawe na ujenzi.
SHANDIKE ni kiwanda cha kwanza cha Kichina kutengeneza mizio ya kuchimba na kinashikilia nafasi ya mbele katika sekta hiyo nchini China ambazo ni za ubora, kiasi cha mauzo, kiasi cha usafirishaji, aina za spesifikationi na uwezo wa kufanana.
Mfafanuzi
Benchi na Pipa za Uzalishaji, Pipa za Kupanua, Pipa za MF (Speed)  |
| Maelezo | Muda | Pembejeo | Uzito | ||
| mm | mguu | mm | inchi | kg | |
| Kijiti cha Nyongeza R32 – Duara32 – R32 | 2435 | 8′ | 32 | 1 1/4” | 14.20 |
| 3050 | 10′ | 32 | 1 1/4” | 17.80 | |
| 3660 | 12′ | 32 | 1 1/4” | 21.30 | |
| MF (Kasi) RodR32 – Round32 – R32 | 3050 | 10′ | 32 | 1 1/4” | 17.90 |
| 3660 | 12′ | 32 | 1 1/4” | 21.45 | |
| 4270 | 14′ | 32 | 1 1/4” | 25.10 | |
| Rod ya Kupanua R38 – Mduara 39 – R38 | 3050 | 10′ | 39 | 1 17/32” | 25.50 |
| 3660 | 12′ | 39 | 1 17/32” | 30.60 | |
| 4270 | 14′ | 39 | 1 17/32” | 35.40 | |
| MF (Speed) RodR38 – Round39 – R38 | 3050 | 10′ | 39 | 1 17/32” | 26.50 |
| 3660 | 12′ | 39 | 1 17/32” | 31.60 | |
| 4270 | 14′ | 39 | 1 17/32” | 36.40 | |
| Rodhi ya Ugani T38 – Mduara39 – T38 | 3050 | 10′ | 39 | 1 17/32” | 25.50 |
| 3660 | 12′ | 39 | 1 17/32” | 30.60 | |
| 4270 | 14′ | 39 | 1 17/32” | 35.40 | |
| MF (Speed) RodT38 – Round39 – T38 | 3050 | 10′ | 39 | 1 17/32” | 26.50 |
| 3660 | 12′ | 39 | 1 17/32” | 31.60 | |
| 4270 | 14′ | 39 | 1 17/32” | 36.40 | |
| Rodhii ya Kupanua T45 – Duara46 – T45 | 3050 | 10′ | 46 | 1 3/4” | 35.80 |
| 3660 | 12′ | 46 | 1 3/4” | 43.00 | |
| 4270 | 14′ | 46 | 1 3/4” | 50.10 | |
| MF (Speed) RodT45 – Round46 – T45 | 3050 | 10′ | 46 | 1 3/4” | 36.40 |
| 3660 | 12′ | 46 | 1 3/4” | 43.70 | |
| 4270 | 14′ | 46 | 1 3/4” | 50.70 | |
| Rodhi ya Kupanua T51 – Mduara52 – T51 | 3660 | 12′ | 52 | 2” | 54.20 |
| 4270 | 14′ | 52 | 2” | 63.50 | |
| MF (Speed) RodT51 – Round52 – T51 | 3660 | 12′ | 52 | 2” | 55.70 |
| 4270 | 14′ | 52 | 2” | 64.80 | |
| Kijiti cha Nyongeza R32 – Duara32 – R32 | 915 | 3′ | 32 | 1 1/4” | 5.50 |
| 1220 | 4′ | 32 | 1 1/4” | 7.32 | |
| 1525 | 5′ | 32 | 1 1/4” | 9.18 | |
| 1830 | 6′ | 32 | 1 1/4” | 10.95 | |
| MF (Kasi) RodR32 – Round32 – R32 | 915 | 3′ | 32 | 1 1/4” | 5.45 |
| 1220 | 4′ | 32 | 1 1/4” | 7.28 | |
| 1525 | 5′ | 32 | 1 1/4” | 9.10 | |
| 1830 | 6′ | 32 | 1 1/4” | 10.72 | |
| Rodhi ya KupanuaT38 – Duara39 – T38 | 1220 | 4′ | 39 | 1 17/32” | 9.20 |
| 1525 | 5′ | 39 | 1 17/32” | 10.25 | |
| 1830 | 6′ | 39 | 1 17/32” | 15.30 | |
| MF (Speed) RodT38 – Round39 – T38 | 1220 | 4′ | 39 | 1 17/32” | 9.50 |
| 1525 | 5′ | 39 | 1 17/32” | 11.25 | |
| 1830 | 6′ | 39 | 1 17/32” | 16.30 | |
| MF (Speed) RodT45 – Round46 – T45 | 1525 | 5′ | 46 | 1 3/4” | 18.50 |
| 1830 | 6′ | 46 | 1 3/4” | 22.20 | |
| MF (Speed) RodT51 – Mduara52 – T52 | 1525 | 5′ | 52 | 2” | 17.85 |
| 1830 | 6′ | 52 | 2” | 28.10 | |
Mifupa ya Kupanua Mduara最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Vipande vya Kitufe cha Thread最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Vichwa vya kuchimba visima vinavyohusika na nyuzi vinajulikana pia kama vichwa vya kitufe ambavyo vinahusishwa na mizozo ya kuchimba visima kwa nyuzi ili kuhamasisha nguvu ya athari na nguvu ya kuzunguka kwa kuvunja mwamba. Vichwa vya kuchimba visima vya nyuzi, vinapofanya kazi na mashine za kuchimba visima za umwagiliaji na mashine za hydraulic jumbos, vina nyuzi kuu za R22, R25, R28, R32, TR35, T38, T45, T51, ST58, ST68, EL60, EL68, na T60.
Vifaa na ufundi
Nyenzo: chuma cha aloi cha daraja la juu
Inserti za Teknolojia: inserti za carbide zilizoshinikizwa moto
Aina ya Uso: Mbele Tambara (kwa kuchimba katika mawe ya kati hadi ngumu na yenye uwezo wa kusagwa)
Kushuka katikati mbele (Kupunguza upotofu wa shimo kwa kuchimba katika miamba yenye ugumu wa kati)
Aina ya Kibonye: Kihisia/Kiparabolic/Kiballistiki/Kiconical
Rangi: Kijani, Rangi ya Machungwa, Dhahabu, Nyeusi au kulingana na mahitaji ya mteja.
Usindikaji: Usagaji wa CNC na mchakato wa matibabu ya joto wa miliki
Vipengele
Vibuto vya aloi vinachomekwa kwa joto kwenye kidole cha kuchimba, kuhakikisha kuwa kidole kina usahihi mzuri na kudumu;
Uaminifu unahakikishwa na vifaa vya kisima vya kiwango cha juu na kitufe cha aloi ya kiwango cha juu;
Aina tofauti zilizoundwa kwa ajili ya hali tofauti za kuchimba na hali za mwamba;
Kasi ya juu na ufanisi wa kuchimba;
Bei nafuu, utendaji mzuri kwa bei inayofaa.
Maombi
Vichwa vya visima vya thread vinatumika sana katika uchimbaji wa madini wazi, uchimbaji wa chini ya ardhi, uchimbaji wa mchanganyiko, kufunga, kuchimba mitambo ya joto, ujenzi wa matundu, uhandisi wa nguvu za maji, uchimbaji wa mawe na ujenzi.
Mfafanuzi
| Vifaa vya Button Bits vilivyo na nyuzi | |
| Aina ya Uzi | R22 R23 R25 R28 R32 R35 R38 TR28 TR32 TR35 |
| T38 T45 T51ST58 GT60 | |
| ST58 GT60 ST68 EL68 EL60 | |
| Dhamana ya Kidonda | 28-165mm (Mizani R) |
| 64-178mm (Niti za T) | |
| 89-152mm (Nyuzi Nyingine) | |
| Aina ya Sketi | Retrac, Imara, Kawaida |
| Muundo wa Uso | Uso wa Mlamoto, Kituo kilichoshuka Konvex |
| Umbo la Kitufe | Concinal Semi Ballsitic Parabolic Full-Spherical , Hemispherical Bamba la Concinal la Nusu-likandamiza la Parabolic Spherical Kamili, Hemispherical |
Vipande vya Kitufe cha Thread最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Adapta za Shank最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Maelezo na ugumu wa kipokea shank cha juu yanaathiri kwa kiasi kikubwa mwendo wa kuchimba mwamba na maisha ya drill ya mwamba. Ugumu wa vipokea shank vya juu kwa ajili ya kuchimba unapaswa kuwa wa kupingana, maisha ya huduma ni fupi ikiwa shank ya drill ya mwamba ni laini sana, pistoni inaweza kuharibiwa kirahisi ikiwa kipokea shank cha drill ni kigumu sana. Kiwanda cha kipokea shank cha Shandike kinayo vipimo sahihi, uso ulio laini, ugumu unaofaa, sehemu ya msalaba ni wima kwa mhimili, na inakutana kwa karibu na sleve ya drill ya mwamba.
Aina tofauti za adaptasi ya shank ya shandike drill
Shandike inatoa adapta za shank zenye nyuzi za kike na kiume, pia inajulikana kama bara la kugonga au mrija wa shank, kama vile adapta ya shank ya T38, adapta ya shank ya T45, adapta ya shank ya T51, nk. Adapta zetu za shank za China zinafaa kwa aina mbalimbali za mashine za kuchimba mawe, kama vile Atlas Copco, Sandvik, Furukawa, Montabert, Ingersoll-Rand, Tamrock, nk., na adapta ya shank ya kuchimba mawe (adapta ya shank ya kuchimba) pia inaweza kubuniwa kulingana na mahitaji ya mteja.
Parameta
• Aina ya nyuzi: R25, R28, R32, R35, R38, T38, T45, T51, nk.
• Kiwango: 32mm-70mm
• Urefu: 273mm-885mm
• Alama za kuchimba mwamba zinazofaa: Atlas Copco, Tamrock, Ingersoll Rand, Boart Longyear, Furukawa, Montabert, Soonsan, Everdigm, nk.
Maombi
Kazi za kuchimba kwa ajili ya kulipua katika mifereji, ujenzi, madini, uchimbaji wa mawe, n.k.
Mfafanuzi
Shoka la Miamba | Adapta za Shank | Thread in Swahili is "wazi". | Urefu (mm) |
Atlas Copco COP1036/1238/1038HB |  | R32 T38 T45 | 500 500 500 |
Atlas Copco COP1432/COP1532/COP1440/COP1838HD/ME |  | R32 R38 T38 R32 TC35 T38 R32 R35 R38 T45 T51 | 435 435 435 525 525 525 525 525 525 525 525 |
Atlas Copco COP1440/COP1550/COP1838 |   | R32 R38 T38 R38 T38 R32 TC35 R38 T38 | 435 435 435 455 455 525 525 525 525 |
Atlas Copco COP1840EX/COP1850EX |  | T38 T45 T51 | 770 770 770 |
Atlas Copco COP1840/COP1850 |  | T45 T51 | 565 565 |
Tamrock HL300 |  | R32 | 400 |
Tamrock HL500-45/510-45 |  | R32 T38 T45 | 550 550 550 |
Tamrock HLX5/HLX5T |  | R32 R38 T38 R32 T38 T45 | 500 500 500 575 575 575 |
Tamrock HL650-45/700-45/700T-45/ 710-45/800T-45 |  | T38 T45 | 600 600 |
Tamrock HL1000/HL1010/HL1000S/ HL1010S-52 |  | T45 T51 T45 T51 | 670 670 590 590 |
Furukawa HD609 |  | T38 T38 T45 | 620 690 620 |
Furukawa HD612 |  | T38 T45 T45 | 710 710 720 |
Furukawa HD709 |  | T38 | 620 |
Furukawa HD712 |  | T45 T51 T45 T51 | 590 590 790 790 |
Montabert HC40 |  | R32 R38 | 447 447 |
Montabert HC80, HC120 |  | T45 | 490 |
Ingersoll-Rand URD475/URD550/VL120/EVL130/VL140 |  | R32 R32 T38 T45 | 330 380 380 380 |
Ingersoll-Rand YH65/YH80 |  | T38 T45 | 500 500 |
Ingersoll-Rand YH65RP/YH70RP/YH75RP/YH80RP |  | T38 T45 | 700 700 |
Adapta za Shank最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Mfupa wa Kuchimba Miamba MF最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.
1. Vipengele vya Kimuundo na Faida za Uhandisi
- Mfululizo huu wa mabomba ya kuchimba unajumuisha mfumo wa muunganiko wa nyuzi wa tofauti-uwiano ulio na patente, ukijumuisha muundo wa nyuzi wa maendeleo zisizo sawa katika mwisho wa kiume (nje) na kike (ndani). Ubunifu muhimu ukilinganisha na mifumo ya nyuzi ya sawa-uwiano ni pamoja na:
- Ufanisi wa usambazaji wa torque unafikia 98.6% (kwa mujibu wa protokali za majaribio za ASTM A919).
- Mwanzo wa moja kwa moja na viunganishi vya shank, ukiondoa haja ya sidiria za kuunganishia.
- Uso wa kushikamana wa siha wa digrii 30, unaongeza eneo la kuwasiliana kwa 40%.
- Koeficienti ya kuzuia mtetemo imeboreshwa hadi 0.85 (inatii viwango vya ISO 3408).
2. Mchakato wa Uzalishaji na Mali za Nyenzo
Kama mtengenezaji mwenye cheti cha ISO 9001:2015, tunaendesha vituo viwili vya uzalishaji vilivyojitosheleza nchini China, vilivyo na:
- Mashine ya kusafisha hewa ya vacuum/dekarbonyazaji oksijeni (VD/VOD)
- Kituo cha mashine ya thread CNC ya axis 5
- Spectrometa za utoaji wa mwangaza (OES) kwa uchambuzi wa anga kamili
Mifumo yetu imetengenezwa kutoka kwa chuma cha aloi cha AISI 4140 Cr-Mo-V kilichobadilishwa (viwango vya ASTM), kikiwa chini ya mchakato wa matibabu ya joto mara tatu:
- 1. Uimarishaji
- 2. Kutia kwenye baridi na kutafuta nguvu
- 3. Nitridi ya uso
Inasababisha vipimo muhimu vya utendaji:
- Ngumu ya uso: 58-62 HRC
- Nguvu ya msingi: ≥45 J (mtihani wa uathirifu wa Charpy)
- Nguvu ya mvutano: ≥1100 MPa
- Ustahimilivu wa uchovu: >10⁶ mizunguko (inayokidhi viwango vya EN 10089)
3. Matiriks ya Bidhaa na Vigezo vya Kiteknolojia
Tunatoa anuwai kamili ya mishiko ya kuzungusha yenye mabadiliko ya haraka inayokidhi viwango vya ISO 1718 na DIN 2050, ikifunika vipimo vya kawaida:
3.1 Mfululizo wa Kuchimba Miamba
- R23MF: Kipenyo kinachofaa Φ76-89mm
- R32MF: Uwezo wa mzunguko 3200 N·m
- R38MF: Kundi la upinzani wa kukunja B
3.2 Msururu wa Uhandisi wa Tuneli
- T35MF: Kina cha kuchimba kilicho kubwa zaidi 35m
- T38MF: Mipako ya kupambana na kuungana imewekwa
- T45MF: Muundo wa mifereji miwili ya baridi
3.3 Mfululizo wa Kuchimba Mashimo Mazito
- GT60MF: Inafaa kwa visima vya >200m
- SR35: Uhimili wa kuathiriwa na hidrokaboni (inayoendana na NACE MR0175)
4. Uthibitishaji wa Ufanisi
Majaribio ya uwanjani yaliyofanywa na Kituo cha Uthibitishaji wa Vifaa vya Jiolojia cha China (CGEC) yanaonyesha:
Ufanisi wa kati wa kuchimba katika miamba ya granite: 1.8 m/dak (ongezeko la 27% ikilinganishwa na mifumo ya kawaida).
-40°C uhifadhi wa torque katika joto la chini: 90% ya uwezo wa alama.
Imetumwa katika miradi mikuu ya kitaifa ikiwa ni pamoja na:
- 铁路四川-西藏
- Kituo cha Umeme wa Maji cha Baihetan
Mfafanuzi wa Mfupa wa MF
R23
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 2095 | 6′ 10 1/2“ | 22 | 7/8″ | 6.4 | MF-R23-H22-2095 |
| MF rod, Hex 22, R23 – R23 | 3050 | 10′ | 22 | 7/8″ | 10 | MF-R23-H22-3050 |
>>SR28
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 3050 | 10′ | 25 | 1″ | 12.1 | MF-SR28-H25-3050 |
| MF nguzo, Hex 25, SR28 – SR28 | ||||||
 | 1200 | 3′ 11 1/4″ | 28 | 1 1/8″ | 6.2 | MF-SR28-H28-1200 |
| MF rod, Hex 28, SR28 – SR28 | 2000 | 6′ 6 3/4″ | 28 | 1 1/8″ | 10.5 | MF-SR28-H28-2000 |
R32
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 915 | 3′ | 32 | 1 1/4″ | 5.5 | MF-R32-D32-915 |
| MF rod, Mduara 32, R32 – R32 | 1220 | 4′ | 32 | 1 1/4″ | 7.5 | MF-R32-D32-1220 |
| 1525 | 5′ | 32 | 1 1/4″ | 9.1 | MF-R32-D32-1525 | |
| 1830 | 6′ | 32 | 1 1/4″ | 11 | MF-R32-D32-1830 | |
| 3050 | 10′ | 32 | 1 1/4″ | 18 | MF-R32-D32-3050 | |
| 3660 | 12′ | 32 | 1 1/4″ | 21 | MF-R32-D32-3660 | |
 | 3700 | 12′ 1 5/8″ | 35 | 1 3/8″ | 29 | MF-T38/R32-H35-3700 |
| MF Drifter kigumu, Hex 35, T38 – R32 | 4305 | 14′ 1 1/2″ | 35 | 1 3/8″ | 34 | MF-T38/R32-H35-4305 |
>>T35
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 1830 | 6′ | 39 | 1 1/2″ | 16 | MF-T35-D39-1830 |
| MF rod, Mduara 39, T35 – T35 | 3050 | 10′ | 39 | 1 1/2″ | 25 | MF-T35-D39-3050 |
| 3660 | 12′ | 39 | 1 1/2″ | 32 | MF-T35-D39-3660 | |
| 4265 | 14′ | 39 | 1 1/2″ | 35 | MF-T35-D39-4265 | |
| 4875 | 16′ | 39 | 1 1/2″ | 40 | MF-T35-D39-4875 | |
 | 4305 | 14′ 1 1/2″ | 39 | 1 1/2″ | 35 | MF-T35/R35-D39-4305 |
| MF Drifter fimbo, Mduara 39, T35 – R35 | 4915 | 16′ 1 1/2″ | 39 | 1 1/2″ | 40 | MF-T35/R35-D39-4915 |
| 5525 | 18′ 1 1/2″ | 39 | 1 1/2″ | 45 | MF-T35/R35-D39-5525 | |
| 6135 | 20′ 1 1/2″ | 39 | 1 1/2″ | 50 | MF-T35/R35-D39-6135 | |
T38
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 915 | 3′ | 39 | 1 1/2″ | 8.1 | MF-T38-D39-915 |
| MF rodu, Duara 39, T38 – T38 | 1220 | 4′ | 39 | 1 1/2″ | 11 | MF-T38-D39-1220 |
| 1525 | 5′ | 39 | 1 1/2″ | 12 | MF-T38-D39-1525 | |
| 1830 | 6′ | 39 | 1 1/2″ | 15 | MF-T38-D39-1830 | |
| 3050 | 10′ | 39 | 1 1/2″ | 25 | MF-T38-D39-3050 | |
| 3660 | 12′ | 39 | 1 1/2″ | 30 | MF-T38-D39-3660 | |
| 4265 | 14′ | 39 | 1 1/2″ | 36 | MF-T38-D39-4265 | |
| 4875 | 16′ | 39 | 1 1/2″ | 41 | MF-T38-D39-4875 | |
>>SR38
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 1830 | 6′ | 39 | 1 1/2″ | 15.3 | MF-SR38-D39-1830 |
| MF fimbo, Mviringo 39, SR38 – SR38 | 3050 | 10′ | 39 | 1 1/2″ | 25 | MF-SR38-D39-3050 |
| 4920 | 16′ 1 3/4″ | 39 | 1 1/2″ | 40 | MF-SR38-D39-4920 | |
T45
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 1220 | 4′ | 46 | 1 3/4″ | 14 | MF-T45-D46-1220 |
| MF vargo, Mduara 46, T45 – T45 | 1525 | 5′ | 46 | 1 3/4″ | 18 | MF-T45-D46-1525 |
| 1830 | 6′ | 46 | 1 3/4″ | 21 | MF-T45-D46-1830 | |
| 3050 | 10′ | 46 | 1 3/4″ | 35 | MF-T45-D46-3050 | |
| 3660 | 12′ | 46 | 1 3/4″ | 41 | MF-T45-D46-3660 | |
| 4265 | 14′ | 46 | 1 3/4″ | 48 | MF-T45-D46-4265 | |
| 6095 | 20′ | 46 | 1 3/4″ | 69 | MF-T45-D46-6095 | |
>>T51
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 1525 | 5′ | 52 | 2″ | 23 | MF-T51-D52-1525 |
| MF rod, Mzunguko 52, T51 – T51 | 1830 | 6′ | 52 | 2″ | 27 | MF-T51-D52-1830 |
| 3660 | 12′ | 52 | 2″ | 50 | MF-T51-D52-3660 | |
| 4265 | 14′ | 52 | 2″ | 57 | MF-T51-D52-4265 | |
| 5485 | 17’11″ | 52 | 2″ | 72 | MF-T51-D52-5485 | |
| 6095 | 20′ | 52 | 2″ | 87 | MF-T51-D52-6095 | |
GT60
| Muda | Pembejeo | Uzito | Nambari ya Mfano. | |||
| [mm] | I'm sorry, but it seems like there is no content provided to translate to Swahili. Please provide the text you'd like to have translated. | [mm] | I'm sorry, but there seems to be a misunderstanding. Please provide the content you would like to have translated to Swahili. | [kg] | ||
 | 3660 | 12′ | 60 | 2 3/8″ | 73 | MF-GT60-D60-3660 |
| MF rod, Mduara 60, GT60 – GT60 | 4265 | 14′ | 60 | 2 3/8″ | 86 | MF-GT60-D60-4265 |
| 5485 | 18′ | 60 | 2 3/8″ | 107 | MF-GT60-D60-5485 | |
| 6095 | 20′ | 60 | 2 3/8″ | 120 | MF-GT60-D60-6095 | |
 | 4265 | 14′ | 64 | 2 1/2″ | 92 | MF-GT60-D64-4265 |
| MF rod, Duara 64, GT60 – GT60 | ||||||
Mfupa wa Kuchimba Miamba MF最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Sleeve ya Kuunganisha Mipira ya Kuchimba最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.
Sleeve ya kiwango cha kuunganisha
Sleeve ya kuunganisha ya kawaida, inayojulikana pia kama sleeve ya kuunganisha ya nusu daraja, ina sehemu ya daraja pasipo na nyuzi katikati. Sehemu yenye nyuzi ya bomba la kuchimba haziwezi kuunganishwa kupitia sehemu ya daraja ya kuunganisha, na mwisho wa nyuzi unaweza kuunganishwa kwa karibu na eneo la daraja la casing. Sleeve ya kuunganisha ya kawaida inafaa hasa kwa mitambo ya kuchimba yenye nguvu kubwa. Sehemu nyingi za nyuzi za nyuzi za kingo (nyuzi R) na nyuzi za trapezoidal (nyuzi T) za kuunganisha ziko na aina ya nusu-daraja. Aina ya nusu-daraja hadi sasa ndiyo inayotumika zaidi.
Sleeve ya kuunganisha daraja kamili
Mala ya kuunganisha daraja kamili inaweza kuondoa kabisa kulegea kwa mala za kuunganisha pamoja na muunganisho wa nyuzi. Inatumika hasa katika uchimbaji wa uso, ikiwa na sifa bora za kubomoa, muunganiko wenye nguvu zaidi, na hali ya kushikilia karibu kabisa.
Mifungamano ya crossover
Muungano wa crossover hutumiwa kubadilisha aina tofauti za nyuzi au saizi za kipenyo cha nyuzi.
Maombi
| Sleeve ya Kuunganisha | ||||
| Thread in Swahili is "wazi". | Pembejeo | Muda | ||
| mm | inchi | mm | inchi | |
| R25 | 35 | 1 19/50 | 150 | 5 9/10 |
| R28 | 40 | 1 29/50 | 155 | 6 1/10 |
| R32 | 45 | 1 3/4 | 170 | 6 57/64 |
| R38 | 55 | 2 5/32 | 170 | 6 57/64 |
| T38 | 55 | 2 5/32 | 190 | 7 33/64 |
| T45 | 63 | 2 15/32 | 210 | 8 17/64 |
| T45 | 66 | 2 19/32 | 210 | 8 17/64 |
| T51 | 72 | 2 7/8 | 235 | 9 1/4 |
| T51 | 76 | 3 | 235 | 9 1/4 |
| Msingi wa Adapter / Msingi wa Crossover | |||||
| Thread in Swahili is "wazi". | Pembejeo | Muda | |||
| A | B | mm | inchi | mm | inchi |
| R25 | R32 | 45 | 1 3/4 | 170 | 6 57/64 |
| R28 | R32 | 45 | 1 3/4 | 170 | 6 57/64 |
| R32 | R38 | 55 | 2 5/32 | 180 | 7 1/8 |
| R32 | T38 | 55 | 2 5/32 | 180 | 7 1/8 |
| R38 | T38 | 55 | 2 5/32 | 190 | 7 33/64 |
Sleeve ya Kuunganisha Mipira ya Kuchimba最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Mifuko ya kuchimba yenye umbo la koni最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Urefu wa mashimo ya kuchimba yenye umbo la taper hupimwa kutoka kwenye collar hadi mwisho wa bit, ambao kwa kawaida ni kati ya mita 0.6 hadi 3.6.
Parameta
Mikondo ya shank: Hex.19mm, Hex. 22mm, Hex.25mm
Miwango ya taper: 7°, 11°, 12°.
Urefu: 400 – 8000mm.
Mfafanuzi:
Majukumu ya kuchimba katika ujenzi wa barabara, ujenzi, uchimbaji madini, uchimbaji mawe, n.k.
| Rodhi za kuchimba zilizopinda za 22mm (7/8″) | L | Kiwango cha Taper | Uzito (kg) | |
| mm | mguu/inchi | |||
H22×108 Shank | 500 | 1′ 5/8″ | 7o | 1.5 |
| 800 | 2′7 1/2″ | 2.4 | ||
| 1000 | 3′3 3/8″ | 3 | ||
| 1200 | 3′11 1/4″ | 3.6 | ||
| 1500 | 4′ 11″ | 4.5 | ||
| 1800 | 5′10 7/8″ | 5.5 | ||
| 2000 | 6′6 3/4″ | 6.1 | ||
| 2200 | 7′2 5/8″ | 6.7 | ||
| 2500 | 8′2 3/8″ | 7.6 | ||
| 3000 | 9′10 1/8″ | 9.1 | ||
| 3500 | 11′5 3/4″ | 10.6 | ||
| 4000 | 13′1 1/2″ | 12.1 | ||
| 4500 | 14′9 1/8″ | 13.6 | ||
| 5000 | 16′4 5/8″ | 15.1 | ||
| 6000 | 19′8 1/4″ | 18.2 | ||
| 7000 | 22′11 5/8″ | 21.2 | ||
| 8000 | 26′ 3″ | 24.2 | ||
H22×108 Shank | 800 | 2′7 1/2″ | 12o | 2.4 |
| 1200 | 3′11 1/4″ | 3.6 | ||
| 1600 | 5′ 3″ | 4.9 | ||
| 2200 | 7′2 5/8″ | 6.7 | ||
| 2400 | 7′10 1/2″ | 7.3 | ||
| 3200 | 10′ 6″ | 9.7 | ||
H22×108 Shank | 1800 | 5′10 7/8″ | 7o | 5.5 |
| 2000 | 6′6 3/4″ | 6.1 | ||
| 2500 | 8′2 3/8″ | 7.6 | ||
| 3000 | 9′10 1/8″ | 9.1 | ||
| 3500 | 11′5 3/4″ | 10.6 | ||
| 4000 | 13′1 1/2″ | 12.1 | ||
| 5000 | 16′4 5/8″ | 15.1 | ||
Mifuko ya kuchimba yenye umbo la koni最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Vichwa vya kuchimba visima vya taper最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Vipande vya taper (vichaka vya kupigia pneumatik, vichaka vya hewa), hasa vipande vya taper vilivyotenganishwa ni vipande vya kupigia maarufu zaidi vya taper vinavyo na uchaguzi mpana wa kipenyo cha kichwa kutoka 26mm hadi 48mm. Kwa vidole vya carbide vilivyochochewa moto kwenye pembe za vipande, vichaka vya kupigia mawe vya pneumatik (vipande vya taper vilivyotenganishwa) vina utendaji mzuri wa kuchimba na ni bora katika kudumu.
Vipengele
- Miili ya bit inayotengenezwa kutoka chuma cha kiwango cha juu na kufanyiwa mchakato kwa kutumia mashine za CNC za kisasa na matibabu ya joto.
- Vibuto vya aloi vinachomekwa kwa joto kwenye kidole cha kuchimba, kuhakikisha kuwa kidole kina usahihi mzuri na kudumu;
- Uaminifu unahakikishwa na vifaa vya kisima vya kiwango cha juu na kitufe cha aloi ya kiwango cha juu;
- Aina tofauti zilizoundwa kwa ajili ya hali tofauti za kuchimba na hali za mwamba;
- Inayopatikana kwa gharama nafuu, ikiwa na bei za ushindani na za haki, bidhaa zetu zinatoa asilimia 82%-92% ya muda wa matumizi wa bidhaa maarufu za chapa.
Mfafanuzi:
Vishimo vya kuchimba vya taper vinahusishwa na nguzo za kuchimba za taper kwa kazi za kuchimba, vinavyofaa kwa ujenzi wa migodi, ujenzi, uchimbaji wa mawe, nk.
 |  |  |
| Bit ya Chisel Taper | Mpunyizi wa Msalaba | Bit ya Kichwa ya Kifuniko |
 | Vichwa vya Chisel vya Taper Degrii ya Taper: 4°46′, 6°, 7° Kipenyo: 26-43mm |
 | Vichwa vya Taper Cross Kiwango cha Taper: 4°46′, 6°, 7°, 11°, 12° kipimo: 32-46mm |
 | 4° 46′ Vichwa vya Taper Button Taper Degree: 4°46′ Kipenyo: 36-43mm |
 | 7° Vipande vya Button vya Taper Kiwango cha Taper: 7° Kipenyo: 32-41mm |
 | 11° Vifaa vya Kuchomelea Mwelekeo wa Taper: 11° Kipenyo: 32-41mm |
 | 12° Vifaa vya Kichwa vya Taper Kipimo cha Taper: 12° Kipenyo: 30-42mm |
Vichwa vya kuchimba visima vya taper最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Mifuko ya kuchimba yenye msumari wa kaboni kamili最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.
Kiwango cha taper: 4°46’, 6°, 7°, 11°, 12°
Sifa za shank: Hex.19mm, Hex. 22mm, Hex.25mm
Mbali na urefu wa kawaida wa mwamba wa kuchimba, kampuni yetu inaweza kubinafsisha urefu wa bidhaa kulingana na mahitaji ya mteja.
Mifuko ya kuchimba yenye msumari wa kaboni kamili最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.DTH（chini ya shimo）Vipande最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Kuchimba kwa DTH (chini ya shimo) kunahusisha nyundo ya kuchimba katika sehemu ya chini ya mfuatano wa kuchimba, nyundo inasubiriwa kwa hewa iliyo na shinikizo inayotumwa kupitia rodl ya kuchimba ili kuendesha pistoni na kutoa nguvu ya athari, ambayo kisha inapelekwa kwenye miamba kwa ajili ya kuchimba na kusaga. Kuchimba kwa DTH kunaweza kutumika katika uchimbaji madini, uchimbaji wa mawe, uchimbaji wa visima vya maji, kuweka misingi, n.k.
Vipengele
1. Uimarishaji wa nguvu ya uchovu kupitia teknolojia ya kufa iliyoboresha.
2. Carbide ya hali ya juu katika saizi bora kwa uimara wa muda mrefu.
3. Teknolojia ya uwekaji sahihi inazuia kuondolewa kwa carbide.
4. Matibabu ya joto ya kisasa yanahakikisha ugumu bora na upinzani wa kuvaa.
5. Ubunifu ulioandaliwa na usindikaji maalum kwa maisha marefu ya huduma katika mazingira tofauti ya miamba.
Kuchagua Umbo la Uso wa Bit
Chaguo la Umbo la Kitufe
DTH BIT BILA VALVU YA KIAKILI
DHD Shank
| Mfano | Bit shank | L | φ | Spline | Hewa shimo | Rec.hole kubwa(mm) |
| JS3.5B | BR33 | 165 | 54 | 7 | 2 | 90-105 |
| JS3.5D | DHD3.5 | 181 | 54.6 | 8 | 2 | 90-105 |
| JS4H | DHD340 | 209 | 65 | 8 | 2 | 105-130 |
| JS5H | DHD350 | 260 | 84 | 8 | 2 | 140-152 |
| JS6H | DHD360 | 308 | 101.5 | 8 | 2 | 152-190 |
| JS8H | DHD380 | 350 | 128.5 | 10 | 2 | 203-245 |
| TSK12H | DHD112 | 490 | 183 | 8 | 3 | 305-380 |
SD Shank
| Mfano | Bit shank | L | φ | Spline | Hewa shimo | Rec.hole kubwa(mm) |
| JS4S | SD4 | 260 | 67 | 8 | 2 | 105-130 |
| JS5S | SD5 | 258 | 82.5 | 8 | 2 | 140-152 |
| JS6S | SD6 | 324 | 102 | 8 | 2 | 152-190 |
| JS8S | SD8 | 321 | 118 | 8 | 2 | 203-245 |
| JS10S | SD10 | 355.8 | 164.5 | 8 | 2 | 245-305 |
| JSK12S | SD12 | 470 | 185.5 | 8 | 3 | 305-380 |
MISSION Shank
| Mfano | Bit shank | L | φ | Spline | Hewa shimo | Rec.hole kubwa(mm) |
| JS3.5M | MISSION35 | 225 | 55 | 8 | 2 | 90-105 |
| JS4M | MISSION40 | 228 | 68 | 12 | 2 | 105-130 |
| JS5M | MISSION50 | 260 | 82.5 | 12 | 2 | 140-152 |
| JS6M | HAKIKISHA60 | 231 | 106.5 | 12 | 2 | 152-190 |
| JS8M | MISSION80 | 329 | 128.5 | 12 | 2 | 203-245 |
QL Shank
| Mfano | Bit shank | L | φ | Spline | Hewa shimo | Rec.hole kubwa(mm) |
| JS4X | QLX40 | 209.5 | 69 | 12 | 2 | 105-130 |
| JS5L | QL50 | 240 | 88.5 | 12 | 2 | 140-152 |
| JS6L | QL60 | 253 | 106 | 12 | 2 | 152-190 |
| JS8L | QL80 | 331 | 136 | 16 | 2 | 203-245 |
| TK12L | QL120 | 492 | 208.5 | 12 | 3 | 305-380 |
DTH BIT NA VALVE YA MIGUU
DHD Shank
| Mfano | Bit shank in Swahili is "shank ya kipande". | L | 中 translates to "katika" in Swahili. | L1 | φ1 | Spline | Hewa shimo | Rec.hole kubwa(mm) |
| JH3.5D | DHD3.5 | 181 | 54.6 | 54.6 | 24.5 | 8 | 2 | 90-105 |
| JH4H | DHD340 | 209 | 65 | 59 | 27 | 8 | 2 | 105-130 |
| The content "JH5H" does not have a direct translation in Swahili, as it appears to be a code or identifier rather than a word or phrase. If you need assistance with anything else, feel free to ask! | DHD350 | 260 | 84 | 56 | 35 | 8 | 2 | 140-152 |
| JH6H | DHD360 | 308 | 101.5 | 55 | 38 | 8 | 2 | 152-190 |
| JH8H | DHD380 | 350 | 128.5 | 51 | 50.6 | 10 | 2 | 203-245 |
| JK12H | DHD112 | 490 | 183 | 52.2 | 63.2 | 8 | 3 | 305-380 |
SD Shank
| HaliI'm sorry, but it seems that the content you want to be translated is missing. Could you please provide the text you would like to have translated into Swahili? | Bit shank | L | 中 translates to "katika" in Swahili. | L1 | φ1 | Spline | Hewa shimo | Rec.hole sura(mm) |
| JH4S | SD4 | 260 | 67 | 54 | 26 | 8 | 2 | 105-130 |
| JH5S | SD5 | 258 | 82.5 | 54.5 | 32 | 8 | 2 | 140-152 |
| JH6S | SD6 | 324 | 102 | 53 | 36.4 | 8 | 2 | 152-190 |
| JH8S | SD8 | 321 | 118 | 57 | 41 | 8 | 2 | 203-245 |
| JH10S | SD10 | 355.8 | 164.5 | 60.3 | 56 | 8 | 3 | 245-305 |
| JK12S | SD12 | 470 | 185.5 | 48 | 63.2 | 8 | 3 | 305-380 |
QL Shank
| HaliI'm sorry, but it seems that the content you want to be translated is missing. Could you please provide the text you would like to have translated into Swahili? | Bit shank | L | φ | L1 | φ1 | Spline | Hewa shimo | Rec.hole sura(mm) |
| JH4X | QLX40 | 209.5 | 69 | 58 | 32.2 | 12 | 2 | 105-130 |
| JH5L | QL50 | 240 | 88.5 | 52 | 38.5 | 12 | 2 | 140-152 |
| JH6L | QL60 | 253 | 106 | 59 | 46 | 12 | 2 | 152-190 |
| JH8L | QL80 | 331 | 136 | 54 | 54.6 | 16 | 2 | 203-245 |
| TK12L | QL120 | 492 | 208.5 | 52.2 | 71.5 | 12 | 3 | 305-380 |
KIDONDA KIKUBWA CHA DTH
Vipengele
◆Chuma maalum cha kiwango cha kijeshi hupunguza mvunjiko na makosa ya kupasuka.
◆Mchakato wa kupiga wa hali ya juu unasisitiza nguvu ya uchovu ya mwili wa chuma wa tundu la kuchimba.
◆Ugunduzi wa kasoro kwa kutumia sauti za juu na chembe za sumaku husaidia kubaini na kuondoa kasoro za vifaa na usindikaji, kupunguza matatizo ya ubora yanayoweza kutokea wakati wa kuchimba.
◆ Vidonge vikubwa vinaongeza muda wa huduma ya kipande cha kuchimba.
◆Uundaji wa CNC unahakikisha vipimo sahihi vya kidonda cha kuchimba.
◆Valvu ya mguu iliyoundwa mahsusi inatoa nguvu na ugumu wa juu, ikihakikisha utendakazi wa kuaminika.
◆Pini ya plastiki inayoweza kufyonzwa mshtuko inaboresha muda wa huduma wa shank spline.
NumaShank
| Mfano | Bit shank | L | φ | L1 | φ1 | Spline | Hewa shimo | Rec.hole kubwa(mm) |
| JH10N | NUMA100 | 375 | 165 | 53 | 54 | 10 | 3 | 245-305 |
| TK12N | Numa120 | 490.5 | 191 | 56.5 | 75.6 | 12 | 3 | 305-380 |
| TK12HN | Numa125 | 491 | 209 | 54 | 74.5 | 10 | 3 | 305-380 |
| TK14 | TK14 | 520 | 235 | / | / | 10 | 3 | 400-500 |
| TK18 | NUMA180 | 527.5 | 297 | 80.7 | 93.2 | 12 | 6 | 500-600 |
| TK24 | TK24 | 560 | 380 | 80 | 118.2 | 14 | 6 | 600-800 |
| TK28 | TK28 | 560 | 430 | 80 | 118.2 | 16 | 6 | 800-1150 |
DTH（chini ya shimo）Vipande最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Maboko ya DTH (chini ya shimo)最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Kiwango bora cha ukubwa wa mashimo kwa ajili ya kuchimba mashimo ya milipuko kwa kutumia DTH ni kutoka 90 mm hadi 254 mm (3 ½”–10″). Mashimo madogo ya milipuko kwa kawaida yanachimbwa kwa kutumia tophammer, na mashimo makubwa kwa kawaida yanatumia mashine za kuzunguka.
Katika matumizi mengine, kama vile kuchimba misingi, mpini wa DTH unaweza kutumika na kisima kimoja katika ukubwa wa mashimo hadi . 750 mm (30″). Kwa uniti nyingi za mpini CD (Mashine za kuchimba cluster) zinachimba mashimo hadi 70″ au 1778 mm.
Kama kanuni ya jumla, kipenyo kidogo zaidi ambacho hansa ya DTH inaweza kuchimba ni saizi yake ya kawaida. Hansa ya inchi 4 itachimba shimo la inchi 4 (102 mm). Kigezo kinachopunguza ni kipenyo cha nje cha hansa, kwa sababu, kadri kipenyo cha shimo kinavyopungua, mtiririko wa hewa unazuiliwa. Kipimo cha juu cha shimo kwa uchimbaji wa uzalishaji ni saizi ya kawaida ya hansa pamoja na inchi 1, hivyo kwa hansa ya inchi 4, kipimo cha juu cha shimo ni inchi 5 (127–130 mm).
Kuchagua nyundo sahihi kunategemea kwa kiasi kikubwa ukubwa wa shimo na aina ya muundo wa mwamba. Kwa kawaida, ukubwa wa nyundo unapaswa kuendana na ukubwa wa shimo unaohitajika kwa karibu iwezekanavyo, ukiacha nafasi ya kutosha kwa vipande kutolewa kutoka kwenye shimo.
Matumizi ya Hewa / Shinikizo la Uendeshaji
Mikodi ya bidhaa ni chombo muhimu kuelezea na kutambua bidhaa. Katika muundo wa msimbo, tumepiga hatua kuelezea sifa za bidhaa kwa mfumo wa alphanumeric na si kila wakati 100% kimantiki, lakini kwa ufunguo ulioambatanishwa utaweza kupata bidhaa unayotafuta au bidhaa mbadala.
Matumizi ya Hewa / Shinikizo la Uendeshaji
Mfafanuzi
| Nyundo | BR2A | DHD3.5 | HK4D | HD45 | HQL4A | HQL50 | HK5Q | HD55 | HQL60 | HQL6A | HQL80 | HD85 | HK9Q | HSD10 | HSD12 | HK12Y | N125-R |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Saizi bora ya kipande, mm | 76 | 92-105 | 112-127 | 140-152 | 165-178 | 203-229 | 216-229 | 245-305 | 305-445 | 305-350 | 305-445 | ||||||
| Bit Shank | BR2A | DHD3.5 | DHD340A | QL40 | QL50 | DHD350 | QL60 | QL80 | DHD380 | QL80 | SD10 | SD12 | HY12 | NUMA125R | |||
| Nafasi ya nje, mm | 63 | 82 | 100 | 100 | 101 | 126.5 | 127.5 | 126.5 | 148 | 146 | 185 | 185 | 203 | 225 | 275 | 275 | 275 |
| Urefu bila nyuzi, mm (Less bit) | 837 | 855 | 915 | 1032.5 | 1057 | 1147 | 935 | 1167 | 1121 | 1182 | 1471 | 1487 | 1345 | 1413 | 1680 | 1590 | 1812 |
| Uzito wa nyundo, kg (Less bit) | 14.1 | 25 | 37.5 | 40.6 | 41 | 71.6 | 67.6 | 77.2 | 105 | 105 | 203 | 206 | 228 | 303 | 526 | 510.2 | 546 |
| Kiasi cha sanduku la kifurushi | (L)910 (W)90 (H)120 | (L)1200 (W)110 (H)140 | (L)1010 (W)130 (H)160 | (L)1080 (W)125 (H)134 | (L)1150 (W)130 (H)160 | (L)1290 (W)150 (H)175 | (L)1100 (W)155 (H)180 | (L)1290 (W)150 (H)175 | (L)1270 (W)170 (H)200 | (L)1260 (W)180 (H)200 | (L)1440 (W)230 (H)270 | (L)1560 (W)230 (H)270 | (L)1500 (W)240 (H)280 | (L)1620 (W)275 (H)290 | (L)1880 (W)320 (H)320 | (L)1665 (W)320 (H)360 | (L)1880 (W)310 (H)310 |
| Subtiti ya Juu | RD50 | 2-3/8″ API REG | 3-1/2″ API REG | 4-1/2″ API REG | 6-5/8″ API REG | 6-5/8″ API REG 7-5/8″ API REG | 6-5/8″ API REG | ||||||||||
| Shinikizo la Kazi, PSI | 80-170 | 150-250 | 200-300 | 250-350 | 300-350 | 300-380 | 300-380 | 150-350 | 200-350 | ||||||||
| Matumizi ya hewa, CFM | 250-350 | 300-400 | 500-700 | 500-800 | 600-900 | 950-1200 | 950-1200 | 1000-1800 | 1200-1500 | 800-1800 | |||||||
| Kipenyo cha piston, mm | 42.7 | 65 | 82 | 80 | 80 | 104 | 102 | 100 | 122 | 121 | 150 | 150 | 165 | 185 | 225 | ||
| Uzito wa pistoni, kg | 1.7 | 5.1 | 9.2 | 9 | 9 | 17 | 17 | 16 | 24 | 24 | 38 | 42 | 50 | 68 | 110 | 111 | 111 |
| Kifaa cha kufungua, mm | L47 W50 | L57 W35 | L74.5 W45 | L64 W40 | HAPANA fungua laini | L89 W60 | L88 W50 | L89 W60 | L101 W65 | L101 W60 | L128 W70 | L140 W70 | L128 W70 | L140 W70 | L140 W70 | L140 W70 | L140 L70 |
| Nguvu ya kulisha, kN | 2~6 | 3~8 | 5~15 | 6~25 | 7~20 | 10~25 | 15~30 | 20~35 | |||||||||
| Kasi ya kuzunguka, r/dak | 30-70 | 3-90 | 25-80 | 20-70 | 25-60 | 20-60 | 15-35 | ||||||||||
| Masharti ya kuchimba na vipimo vya mradi yanaweza kuhitaji kutumika pakiti kubwa ya hewa. | |||||||||||||||||
Maboko ya DTH (chini ya shimo)最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Pipa la kuchimba DTH最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Pipa ya kuchimba DTH inajumuisha pipa na adapta mbili, kisanduku na pini. Tunatumia chuma cha alloy chenye nguvu kubwa na upinzani mzuri, kuingiza pipa isiyo na mshono yenye nguvu ya juu, na kulingana na kina tofauti cha kuchimba, tunaweza kutoa pipa na unene tofauti na vifaa kulingana na mahitaji ya wateja.
Sifa za bomba la kuchimba DTH
• Kipimo: 76mm, 89mm, 102mm, 114mm, 127mm, 140mm
• Urefu: 1000mm, 1500mm, 2000mm, 3000mm, 5000mm, 6000mm
• Uzi: 2 3/8’’ API REG, 2 7/8’’ API REG, 3 1/2’’ API REG, 4 1/2’’ API REG, 2 3/8″ API IF, 3 1/2″ API IF; BECO 6”, BECO 8”
• Unene wa ukuta: 5.5mm/6.5mm/7.5mm/8.5mm/10mm
• Saizi nyingine maalum inaweza kubadilishwa kulingana na mchoro wa mteja.
• Teknolojia ya matibabu ya joto ya hali ya juu na mashine ya kulehemu kutokana na msuguano.
Mfafanuzi
| Rod dia in Swahili is "Rod dia". | Urefu wa tawi | Unene | Unganisha uzi | Vifungo vya ufunguo | |
| (inchi) | (mm) | (mm) | (mm) | (mm) | |
| 3 | 76 | 1000-6000 | 5 | API2 3/8”REG | 57/64.5 |
| 3 | 76 | 1000-9000 | 8 | API2 3/8”REG | 57/64.5 |
| 3 1/2 | 89 | 1000-6000 | 6 | API2 3/8”REG | 70/64 |
| 3 1/2 | 89 | 1000-9600 | 8 | API2 3/8”REG | 70/64 |
| 4 | 102 | 1000-9000 | 10 | API2 3/7”REG | 76/89 |
| 4 1/2 | 114 | 1500-7620 | 6 | API3 1/2”REG | 89/95 |
| 4 1/2 | 114 | 1500-9140 | 8 | API3 1/2”REG | 89/95 |
| 4 1/2 | 114 | 1500-9140 | 10 | API3 1/2”REG | 89/95 |
| 4 1/2 | 114 | 1500-9140 | 18 | API3 1/2”REG | 89/95 |
| 5 | 127 | 1500-9500 | 12 | API3 1/2”REG | 89 |
| 5 | 127 | 1500-9500 | 14 | API3 1/2”REG | 89 |
| 5 | 127 | 1500-9500 | 18 | API3 1/2”REG | 89 |
| 5 1/2 | 140 | 1500-9500 | 9 | API4 1/2”REG au 4’FH | 114 |
| 5 1/2 | 140 | 1500-9500 | 10 | API4 1/2”REG au 4’FH | 114 |
| 5 1/2 | 140 | 1500-9500 | 12 | API4 1/2”REG au 4’FH | 114 |
Pipa la kuchimba DTH最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.DTH Nyundo ya Nyuma最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Mpira wa nyuma unaweza kuwekwa kwenye kipande cha bomba la kuchimba kati ya grip ya shimo na kichwa cha kuzunguka, hivyo kuunda athari pamoja ya kipigo cha kurudi nyuma kinachofaa na vibration.
Kiboko cha nyuma kinajumuisha vipengele vitatu na nyumba ya plastiki.
Makazi hufanya kazi kama mwongozo wa kutoa moshi wa hewa na kama muffler. Kuhusu matengenezo, ni muhimu tu kuiweka safi na sehemu ya kuunganisha tulilinda wakati shoka la nyuma halitumiki.
DTH Nyundo ya Nyuma最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.(Hammer ya Mzunguko Inakurudi) RC最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.
Uchakataji wa mafuta na gesi na uwanja mwingine. Bidhaa zetu kuu zinajumuisha vipigo na vidokezo vya DTH (chini ya shimo) vyenye uwezo wa kuchimba mashimo kutoka 64mm–1020mm kwa kipenyo, zana za kuchimba za DTH zenye kipenyo kubwa kwa kuchimba mashimo marefu, mfumo wa casing wa eccentric (ODEX) na mfumo wa casing wa concentric, vipigo na vidokezo vya akiba vya mzunguko, mzigo wa kuchimba, vifaa vya kuchimba masoko na vifaa vingine vinavyohusiana. Kwa nguvu kubwa ya kiufundi, tunajitahidi kuunda chapa bora ya zana za kuchimba za Kichina, na kuwa mtengenezaji bora duniani.
Manufaa
Kuchukua sampuli sahihi;
Uendeshaji wa mazingira;
Ikilinganishwa na zana za kuchimba za kawaida, zana za RC huzungusha vipande vya udongo ndani ya bomba kwa upinzani mdogo ili kuwezesha flushing rahisi;
Chuma cha aloi maalum kilichotengenezwa kwa ajili ya bomba la sampuli na kifuniko, na uso wa bomba la kuosha umeimarishwa;
Rangi za kuziba za ubora mzuri zinateuliwa kama ifuatavyo:
Vifaa vya Kuchimba kwa Kizunguzungu cha Nyuma
Mfumo wa kuchimba ambao unatoa gesi kutoka ndani ya bomba; Matumizi ya hewa ya chini; Kina cha kuchimba kisichozidi 600m; Kila kichwa kinapaswa kuendana na kifuniko kinachofanana.
Mekanizma ya uendeshaji
Air iliyo na shinikizo inaingia kwenye nafasi ya annular ya bomba la kuchimba la kuta mbili, kisha inaingia kwenye bomba la ndani kutoka kwa zana za kuchimba chini ya shimo, na inabeba vipande vya udongo hadi ardhini kupitia bomba la ndani.
Maombi
Vyombo vya RC vinatumiwa katika uchunguzi wa jiolojia, kuchimba visima vya maji n.k.
Mfafanuzi
| Mfano | Rec.hole kubwa(mm) | Thread in Swahili is "wazi". muungano | Nje kipenyo(mm) | Muda bila bit(mm) | Uzito (kg) |
| TH1080RC | 115-130 | REMET3.5” | 108 | 1145 | 50 |
| TH1162RC | 124-146 | METZKE4.0″ | 116 | 1191 | 61 |
| TH1186RC | 126-146 | REMET4.0" | 118 | 1210 | 64 |
| TH1214RC | 130-146 | METZKE4.0″ | 121 | 1234 | 73 |
| TH1261RC | 135-152 | REMET4.5″ | 126 | 1272 | 68 |
| TH1305RC | 140-165 | REMET4.5” | 130 | 1294 | 82 |
| TH0820RC | 203-254 | REMET4.5″ | 188 | 1415 | 210 |
| TH12JORC | 305-450 | API85/8”REG | 280 | 1869.5 | 590 |
Tangazo: Kuna uwezekano kwamba SHANDIKE inaweza kufanya mabadiliko kwenye maelezo yaliyojumuishwa hapo juu. Picha za bidhaa na vigezo kuhusu mifano, data, utendaji na vip_specification kwenye tovuti hii ni kwa ajili ya rejeleo tu.
(Hammer ya Mzunguko Inakurudi) RC最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.RC (kuzunguka nyuma) Kidogo cha DTH最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Vifaa vya RC ni chombo kinachokatakata mwamba. Vidokezo vya SHANDIKE RC DTH vimetengenezwa kwa chuma cha sifa bora na tungsten carbide.
Faida za mfumo wa RC
1. Teknolojia ya Mzunguko wa Kurudi
– Inatumia mfumo wa kipekee wa mzunguko wa hewa/maji ambao unasafirisha vipande juu kupitia katikati ya nyuzi za kuchimba, kuhakikisha sampuli safi na zisizo na uchafu.
– Inapunguza mwelekeo wa shimo na kuboresha usahihi wa kuchimba kwenye muundo ulio vunjika au usio na utulivu.
2. Ubunifu wa Juu wa Utendaji
– Mpangilio wa Vitufe vya Carbide: Vitufe vya tungsten carbide vilivyowekwa kwa mbinu kwa ajili ya uhamasishaji wa nishati ya mgongano na kuongeza muda wa maisha ya kipande.
– Mchoro wa Kupiga Mbali Ulioboreshwa: Unahakikisha kuondolewa kwa ufanisi kwa vipande na kupunguza kuunganishwa katika muundo wenye gundi.
3. Ufanisi na Uwezo wa Kubadilika
– Inatengenezwa kutoka kwa chuma cha alloy cha kiwango cha juu na matibabu ya joto ya kisasa kwa ajili ya upinzani mzuri wa kuvaa na athari.
– Inafaa na aina mbalimbali za miamba, ikiwa ni pamoja na ngumu, yenye kusaga, na muundo ulio na mapengo mengi.
4. Matengenezo Rahisi
Ubunifu wa moduli unaruhusu kubadilishwa haraka kwa vipengele vilivyochoka, kinakunguza muda wa kutokuwa na kazi na gharama za uendeshaji.
Mafunzo ya Kiufundi
– Kipenyo cha Mchoro: 90mm hadi 350mm (kubwa za kawaida zinapatikana).
– Aina ya Muunganisho: API ya Kawaida au chaguo za thread za kawaida (mfano, R32, COP, n.k.).
– Shinikizo la Uendeshaji: 15–30 bar.
– Mara ya Athari: 1,200–2,400 mipigo kwa dakika (BPM).
– Nyenzo: Mwili wa chuma chenye nguvu kubwa na vidonge vya tungsten carbide.
Maombi
– Utafutaji wa Madini: Unapata sampuli bora za msingi kwa ajili ya tathmini sahihi ya rasilimali.
– Kuchimba Visima vya Maji: Inapenya kwa ufanisi katika tabaka ngumu za mwamba wakati ikihifadhi ustawi wa shimo la kuchimba.
– Utafiti wa Jiografia: Bora kwa uchukuaji wa sampuli za udongo na mwamba katika hali tata za jiolojia.
– Kuangua Mashimo: Huongeza uzalishaji katika shughuli za uchimbaji na madini.
Faida Zake Juu ya Bits za DTH za Kawaida
Viwango vya Kupenya Vilivyo Juu: Uhamisho wa nishati ulioimarishwa unaweka dhamana ya kuchimbua haraka zaidi.Mifano Safi: Mzunguko wa nyuma hupunguza uchafuzi kwa uchambuzi sahihi.Kupunguzwa kwa Kupoteza Hewa: Muundo wa kuziba unazuia njia ya kutoroka hewa, unaboresha ufanisi wa nishati.Maisha ya Huduma Yaliyoongezwa: Ujenzi thabiti hupunguza kuvaa katika mazingira yenye abrasive.
Kwa Nini Uchague RC DTH Bit Yetu?
– Suluhu za Kibinafsi: Mifano iliyoundwa kukidhi mahitaji maalum ya mradi.
– Vyeti vya Kimataifa: Vinavyolingana na ISO 9001 na viwango vya kimataifa vya kuchimba.
– Usaidizi wa Kiufundi: Msaada wa wataalamu 24/7 kwa ajili ya kutatua matatizo na kuboresha.
Maombi
Vyombo vya RC vinatumiwa katika uchunguzi wa jiolojia, kuchimba visima vya maji n.k.
Kipimo:
| Bit kipenyo | No.X Button in Swahili is "Kitufe". kipenyo(mm) | Hewa shimo | Uzito (kg) | Nyundo aina | ||
| mm | inchi | Kipima kiwango | Mbele | |||
| 115 | 41/2 | 8×14 | 4×14+4×13 | 2 | 10 | TH1080RC |
| 120 | 43/4 | 8×14 | 4×14+4×13 | 2 | 10.5 | TH1162RC |
| 127 | 5 | 8×14 | 4×14+4×13 | 2 | 11 | TH1186RC |
| 130 | 51/8 | 8×16 | 6×14+4×14 | 2 | 11.5 | TH1214RC |
| 133 | 51/4 | 8×16 | 6×14+5×14 | 2 | 15.6 | |
| 137 | 53/8 | 8×16 | 6×14+5×14 | 2 | 16.0 | TH1261RC |
| 140 | 51/2 | 8×16 | 6×14+5×14 | 2 | 18.8 | |
| 146 | 54/3 | 8×16 | 6×14+5×14 | 2 | 19.5 | TH1305RC |
| 152 | 6 | 8×16 | 6×14+5×14 | 2 | 21 | |
Tangazo: Kuna uwezekano kwamba SHANDIKE inaweza kufanya mabadiliko kwenye maelezo yaliyojumuishwa hapo juu. Picha za bidhaa na vigezo kuhusu mifano, data, utendaji na vip_specification kwenye tovuti hii ni kwa ajili ya rejeleo tu.
RC (kuzunguka nyuma) Kidogo cha DTH最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.GSE DHD DTH Vifaa vya Kupiga最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.Kuchimba kwa DTH (down-the-hole) kunahusisha nyundo ya kuchimba katika sehemu ya chini ya mfululizo wa kuchimba, nyundo hiyo inaendeshwa na hewa iliyoshinikizwa inayopitishwa kupitia mguu wa kuchimba ili kuendesha pistoni na kuzalisha nguvu ya athari, ambayo kisha inapelekwa kwenye miamba kwa ajili ya kuchimba na kusagwa. Kuchimba kwa DTH kunaweza kutumika katika uchimbaji madini, uchimbaji wa mawe, kuchimba visima vya maji, kuweka nguzo za msingi, n.k. Nyundo ya DTH inatumia hewa iliyoshinikizwa kuzalisha nguvu ya athari, hivyo kuendesha vipande vya kuchimba kusaga miamba.
Vipengele
• Nyenzo za kifahari, mchakato mzuri wa utengenezaji wa CNC na matibabu ya joto, na muundo ulioimarishwa;
• Utulivu mzuri na kuaminika;
• Masafa ya athari kubwa;
• Kupunguza matumizi ya hewa shinikizimu;
• Muda mrefu wa kuishi
Maombi
Uchimbaji madini, uchimbaji wa mawe, uchimbaji wa visima vya maji, uchimbaji wa visima vya joto la ardhi, kutengeneza msingi, n.k.
Muundo
  | 01 – Juu ya Sub | 02 – O Pembe | 03 – Kifaa cha Kuangalia | 04 – Majira ya spring |
| 05 – Shinikizo la Chuma | 06 – Kifaa Kisichoweza Kusogezwa | 07 - O Ring | 08 – Silinda ya Ndani | |
| 09 – Pistioni | 10 – Tubo la Nje | 11 – Pete ya Kushikilia Kidokezo | 12 – Pete ya O | |
| 13 – Endesha Sub |
GSE-DHD3.5 DTH Hammer
| Uzito Halisi | Diameter ya Nje | GSE DHD3.5 DTH Nyundo Urefu Bila Vidokezo | Mara kwa mara katika 18 Bar | |
| 22.62 kg | 80 mm | 808 mm | 32 Hz | |
| Rec. Kipimo cha Shimo | Shinikizo la Kazi | Matumizi ya Hewa: M3(CBM)/dakika | ||
| 90 mm-105 mm | 8 baa – 30 baa | @10 bara | @18 baa | @24 baa |
| 4.5 | 9.5 | 12.5 | ||
GSE-DHD340 Nyundo ya DTH
| Uzito Halisi | Diameter ya Nje | GSE DHD340 DTH Pande za Kijiko Urefu Bila Vidokezo | Mara kwa mara katika 18 Bar | |
| 38.00 kg | 99 mm in Swahili is "99 mm". | 881 mm in Swahili is "881 mm". | 31 Hz | |
| Rec. Kipimo cha Shimo | Shinikizo la Kazi | Matumizi ya Hewa: M3(CBM)/dakika | ||
| 108mm – 130mm | 8 baa – 30 baa | @ 10 baa | @ 18 baa | @ 24 bar |
| 5 | 10.2 | 15 | ||
GSE-DHD350 Nyundo ya DTH
| Uzito Halisi | Diameter ya Nje | GSE DHD350 Nyundo ya DTH Urefu Bila Vito | Mara kwa mara katika 18 Bar | |
| 74.0 kg | 126 mm | 1028 mm | 30 Hz | |
| Rec. Kipimo cha Shimo | Shinikizo la Kazi | Matumizi ya Hewa: M3(CBM)/dakika | ||
| 134mm – 152mm | 8 baa – 30 baa | @ 10 baa | @ 18 baa | @ 24 bar |
| 7.5 | 14.7 | 19.5 | ||
GSE-DHD360 DTH Hammer
| Uzito Halisi | Diameter ya Nje | Urefu wa GSE DHD360 DTH Hammer Bila Bits | Mara kwa mara katika 18 Bar | |
| 112 kg | 144 mm translates to "144 mm" in Swahili, as unit measurements like millimeters are the same in both languages. | 1135 mm | 28 Hz | |
| Rec. Kipimo cha Shimo | Shinikizo la Kazi | Matumizi ya Hewa: M3(CBM)/dakika | ||
| 154mm – 254mm | 8 baa – 30 baa | @ 10 baa | @ 18 baa | @ 24 bar |
| 8.7 | 14.5 | 25 | ||
GSE-DHD380 Mkoloni wa DTH
| Uzito Halisi | Diameter ya Nje | Urefu wa Nyundo wa GSE DHD 380 DTH Pasipo na Vidokezo | Mara kwa mara katika 18 Bar | |
| 180.0 kgs in Swahili is "kg 180.0. | 182 mm in Swahili is "182 mm". | 1228 mm | 23 Hz | |
| Rec. Kipimo cha Shimo | Shinikizo la Kazi | Matumizi ya Hewa: M3(CBM)/dakika | ||
| 203mm – 305mm | 8 baa – 30 baa | @ 10 baa | @ 18 baa | @ 24 bar |
| 12 | 26 | 35 | ||
GSE DHD DTH Vifaa vya Kupiga最先出现在 translates to "Ilionekana kwanza" in Swahili.Vifaa vya Kuchimba Miamba (R22, R28, R35, T38, T45, T51, G60 vijiti na vidokezo) - SHANDIKE。
It seems you've provided a markup tag (]]>) without any content to translate. Please provide the text you would like me to translate into Swahili.